Stontex Cement Away effortlessly removes surface residues such as grout and cement,efflorescence, encrusted and engrained dirt, rust as well as calcium and lime scale deposits.The product can be used indoors and outdoors after the installation process or during construction. All surfaces must be acid resistant such as ceramic tiles, porcelain,brick, clay and quarry tiles, terracotta, concrete and other types of natural hard stones.
Directions:
Depending on contaminated area, use full strength or dilute up to 10 parts water to 1 part of the liquid.
Wet surfaces first then apply the cleaner and leave it to dwell for 20 min. After the dwell time rinse the area with clean water.
In case of heavy soiling or staining, repeat the process.
Where to Use
This product can be used both inside and outside on natural stone, brick and tiles. However do not use on polished limestone, marble or concrete, You will need a specialist from our network to clean and restore sensitive polished surfaces.
Application and Time
Apply neat or dilute 1 to 3 max, any weaker it will not be very effective. Agitate with a nylon brush, allow to dwell on the surface for a few mins then rinse with water.
Equipment
Hand held pump spray bottle to target application.
Hard bristle nylon brush to agitate.
Power washer / hose to rinse.
Coverage Rate
Approximately 5sqm neat or 15sqm diluted 1 to 1 with water. Coverage depends on how much or how badly the material is stained.
Related Products
€43.67 Ex VAT: €35.50
€35.01 Ex VAT: €28.46
€36.90 Ex VAT: €30.00
€31.98 Ex VAT: €26.00
€34.99 Ex VAT: €28.45