You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Opening Times: Mon - Fri 8am to 5pm Sat 9am to 2pm
  • SHOPPING CART

  • Your shopping cart is empty!

DOUBLEL Concrete & Granite Products

Protect Guard Colour Enhancer

  • Availability: In Stock
FROM: €50.00 Ex VAT: €40.65

Stontex Protect Guard Colour Enhancer is made to give a long lasting wet look to any natural natural stone paving.

This liquid is a solvent based colour enhancer and impregnator that penetrates into the surface of the stone to protect against oil and water based stains.

 This product is UV resistant and does not yellow. 

 Stontex Protect Guard Colour Enhancer can be applied 48hrs after installation process.

Not recommended for use on highly polished,glazes/ceramic and non-porous surfaces.


Direction:

Ensure stone is clean and dry prior to application of sealer.

Pour contents into a paint tray and apply  light coat evenly with a short play paint roller.

If the next day the stone  looks inconsistent where the sealer has soaked deeper into the stone in certain areas then apply a second coat and repeat application as before to uniform the colour.

Ensure that the treated surface remains dry for at least 6 hours after the full application process(pick a dry day to apply)

Coverage:

5L- 10-20M2/Litre 

1L-10-20M2/Liter

Coverage will vary depending on surface porosity


0

There are no reviews for this product.

Write a review
Please login or register to review

Stontex Protect Guard Colour Enhancer is made to give a long lasting wet look to any natural natural stone paving.

This liquid is a solvent based colour enhancer and impregnator that penetrates into the surface of the stone to protect against oil and water based stains.

 This product is UV resistant and does not yellow. 

 Stontex Protect Guard Colour Enhancer can be applied 48hrs after installation process.

Not recommended for use on highly polished,glazes/ceramic and non-porous surfaces.


Direction:

Ensure stone is clean and dry prior to application of sealer.

Pour contents into a paint tray and apply  light coat evenly with a short play paint roller.

If the next day the stone  looks inconsistent where the sealer has soaked deeper into the stone in certain areas then apply a second coat and repeat application as before to uniform the colour.

Ensure that the treated surface remains dry for at least 6 hours after the full application process(pick a dry day to apply)

Coverage:

5L- 10-20M2/Litre 

1L-10-20M2/Liter

Coverage will vary depending on surface porosity